Pioneer CNDV-80MT User Manual

Page 10

Advertising
background image

In case of the cross disc routing

Only when setting your destination for the
another disc, it is necessary to replace from the
current disc to another disc.
In case of the cross disc routing, the following
procedure is recommended.

1

Insert the disc containing the destination
you want to set.

2

Search for the destination and set as your
destination.

3

After route calculation finished, remove
the current disc.

4

Insert the disc containing your current
location.

The navigation system reboot automati-
cally with keeping your destination and
route set.

5

Drive toward your destination.

When you approach the areas not stored
on the disc, the navigation system notify
you of approaching that area. Replace the
disc at that time.

Removing the disc and inserting another disc
causes the navigation system to automatically
restart and reload the new route. (This auto-
matic “Reroute” operation cannot be can-
celled.)

Limitation of Functions for

Areas not Stored on the Disc

For areas not stored on the disc, the functions
will operate as follows:

Displaying the map

• Maps with a scale of between 25 m and 200 m

cannot be displayed. (If the scale was set to
between 25 m and 200 m, it is automatically
switched to 500 m.)

• When driving with Mixed Mode, St.List

Mode or Driver’s View, upon entering an
area not stored on the disc the display auto-
matically switches to Map Mode. (When the
vehicle reenters an area stored on the disc, the
display returns to the previous map mode
except for Driver’s View.)

Destination search

• You cannot search a destination in an area not

stored on the disc using Address Search,
POI Search, Vicinity Search or Postal
Code Search
(including operation by voice
recognition).

• If you cannot search in a currently selected

country, the system may forcibly switch to the
country selection screen.

• A Motorway Search covers all areas, regard-

less of the disc on which the information is
stored.

• If a Vicinity Search is performed on the bor-

der of an area not stored on the disc, the sys-
tem will not necessarily select the nearest
facility. (The search will take place only within
the range of areas stored on the disc.)

Guidance

• When your vehicle approaches an area not

stored on the disc, you will be notified three
times: when the distance to the area not stored
on the disc is 20 km (12 miles), 10 km (6 miles)
and 5 km (3 miles) respectively. When your
vehicle enters that area, a caution is given.

• In the areas not stored on the disc, only guid-

ance for reaching the destination is provided.
No other guidance is given.

• If a route calculation is operated within an

areas not stored on the disc, the route might
not be set from the streets you are currently
driving. Also, if you set the destination in an

MAN-CNDV-80T-EN.fm Page 10 Wednesday, April 2, 2008 11:31 AM

Advertising