Route information, Other function limitations – Pioneer CNDV-80MT User Manual

Page 11

Advertising
background image

area not stored on the disc of the disc, the sys-
tem may not be able to set the route up to the
destination.

• If the vehicle deviates from the set route in an

area not stored on the disc, the Auto Reroute
function will not work.

• Even if [Close-up of Junction] is [On], the

display will not switch to an enlarged map of
the junction.

• Even if you drive on the motorway, lane infor-

mation, motorway exit numbers and motorway
signs will not be displayed.

Route information

• If the set route goes through an area not stored

on the disc, no route profile for that area will be
displayed. (If the set route traverses both an
area not stored on the disc and area stored on
the disc, only the route profile within the area
stored on the disc will be displayed.)

• Route scrolling for an area not stored on the

disc is possible only with a map scale of 500 m
or above.

Other function limitations

Avoid area

• An area not stored on the disc cannot be set as

an Areas to Avoid.

A set Areas to Avoid may be deleted when
the software is updated. If this happens, the
system will automatically try to recover the
deleted information, but data can be recov-
ered only for areas stored on the disc. For
items that could not be recovered, a recovery
process will begin when you set another disc.

MAN-CNDV-80T-EN.fm Page 11 Wednesday, April 2, 2008 11:31 AM

Advertising