Calling the wake-up timer, Cancelling the wake-up timer, Using the wake-up timer – Pioneer X-HM51DAB-K User Manual

Page 16: Using the sleep timer, Using headphones, Getting started 04

Advertising
background image

Getting started

04

16

En

Calling the wake-up timer

An existing timer setting can be reused.

1

Follow steps 1 to 3 in “Setting the wake-up

timer”.

2

Press

/ to select “TIMER ON”, then press

ENTER.

Cancelling the wake-up timer

Turn off the timer setting.

1

Follow steps 1 to 3 in “Setting the wake-up

timer”.

2

Press

/ to select “TIMER OFF”, then

press ENTER.

Using the wake-up timer

1

Press

STANDBY/ON to turn the power

off.

2

At the wake-up time, this unit will turn on

automatically and play the selected input
function.

Note

• If at the wake-up time an iPod/iPhone/iPad is not

connected to the unit or a disc is not inserted, the unit

will be turned on but will not play back the track.

• Some discs may not be played automatically at the wake-

up time.

• When setting the timer set at least one minute between

the start and end time.

Using the sleep timer

The sleep timer switches off the unit after a specified time so

you can fall asleep without worrying about it.

1

Press SLEEP repeatedly to select a switch off

time.

Choose between 10 min, 20 min, 30 min, 60 min, 90 min, 120

min, 150 min, 180 min or OFF. The newly set value displays for

3 seconds, and then the setting is completed.

Note

• The sleep timer can be set by pressing SLEEP while the

remaining time is displayed.

Using Headphones

Connect the headphones plug to the PHONES terminal.
When the headphones are connected, there is no sound

output from the speakers.

• Do not turn the volume on to full at switch on and listen

to music at moderate levels. Excessive sound pressure

from earphones and headphones can cause hearing

loss.

• Before plugging in or unplugging the headphone,

reduce the volume.

• Be sure your headphone has a 3.5 mm diameter plug

and impedance between 16  and 50 . The

recommended impedance is 32 .

• Audio from the iPod/iPhone/iPad cannot be heard via

the headphones connected to the unit. “HP MUTE” will

be displayed if you connect the headphones when the

iPod/iPhone/iPad function is selected.

 STANDBY/ON

INPUT

VOLUME

PHONES

AUDIO IN





TIMER

X-HM51DAB_VXE8_En.book 16 ページ 2013年3月22日 金曜日 午前9時19分

Advertising