Additional information 11 – Pioneer X-HM51DAB-K User Manual
Page 36
Additional information
11
36
En
When an iPod/iPhone/iPad is connected
Power is not supplied to the
USB storage device.
Is AUTH ERROR displayed on the
front panel display? No power is
supplied if the power consumption is
too high.
Turn the power off then back on.
Turn the power off, then disconnect and reconnect the USB storage
device.
Press INPUT to switch to the other input, then switch again to the
USB
/iPod input.
Problem
Check
Remedy
Problem
Remedy
Can’t operate the iPod/iPhone/iPad by the remote control.
Make sure the iPod/iPhone/iPad is connected correctly (refer to
Connecting your iPod/iPhone/iPad on page 17).
Can’t operate the iPod/iPhone/iPad.
Make sure the iPod/iPhone/iPad is connected correctly (refer to
Connecting your iPod/iPhone/iPad on page 17).
If the iPod/iPhone/iPad is experiencing a hangup, try resetting the
iPod/iPhone/iPad, and reconnect it to the unit.
X-HM51DAB_VXE8_En.book 36 ページ 2013年3月22日 金曜日 午前9時19分