Pioneer DCS-424K - Manual (Page 18)

18 Installation
Installa
tion
3
Wall mounting
The center speaker have a mounting hole
which can be used to mount the speaker
on the wall.
Before mounting
Remember that the speaker system is
heavy and that its weight could cause the
screws to work loose, or the wall material
to fail to support it, resulting in the speaker
falling. Make sure that the wall you intend
to mount the speakers on is strong enough
to support them. Do not mount on plywood
or soft surface walls.
Mounting screws are not supplied. Use
screws suitable for the wall material and
support the weight of the speaker.
CAUTION
• If you are unsure of the qualities and
strength of the wall, consult a professional
for advice.
• Pioneer is not responsible for any accidents
or damage that result from improper
installation.
5 mm to 7 mm
Mounting screw
(not supplied)
5 mm
10 mm
Additional notes on speaker
Install the main front left and right
speakers at an equal distance from the TV.
Precautions:
The center speaker supplied with this
system are magnetically shielded. However,
depending on the installation location,
color distortion may occur if the speaker is
installed extremely close to the screen of
a television set. If this case happens, turn
the power switch of the television set OFF,
and turn it ON after 15 min. to 30 min. If
the problem persists, place the speaker
system away from the television set.
The subwoofer is not magnetically shielded
and so should not be placed near a TV or
monitor. Magnetic storage media (such as
floppy discs and tape or video cassettes)
should also not be kept close to the
subwoofer.
Do not attach the subwoofer to a wall or
ceiling. They may fall off and cause injury.