Pioneer DCS-424K - Manual (Page 31)

31 Operation
4
Oper
ation
Radio Operations
Be sure that FM aerial is connected. (Refer
to the page 24)
Listening to the Radio
1. Press FM TUNER or FUNCTION until FM
appears in the display window.
The last received station is tuned in.
2. Scanning will start when either the 
or the  button is pressed.
or
Press / repeatedly.
3. Adjust the volume by rotating VOLUME
on the front panel or by pressing
VOL + or VOL – on the remote control
repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have
turned down the volume.
1. Press FM TUNER or FUNCTION until FM
appears in the display window.
The last received station is tuned in.
2. Select the desired frequency by using
/ .
3. Press PROGRAM a preset number will
flash in the display window.
4. Press / to select the preset number
you want.
5. Press PROGRAM.
The station is stored.
6. Repeat the steps 2 to 5 to store other
stations.
7. You can select the stored station by
pressing / .
Deleting all the saved stations
1. Press and hold STOP for two seconds.
“ERASE ALL” will flash up on the display
window.
2. Press STOP to erase all of the saved
radio stations.
Improving poor FM reception
Press AUDIO on the remote control. This
will change the tuner from stereo to mono
and usually improve the reception.