Making recordings, Making an audio or a video recording, 08 making recordings – Pioneer VSX-520-S User Manual

Page 47: Making recordings 08, Chapter 8, English français español

Advertising
background image

Making recordings

08

47

En

English

Français

Español

Chapter 8:

Making recordings

Making an audio or a video
recording

You can make an audio or a video recording
from the built-in tuner, or from an audio or
video source connected to the receiver (such
as a CD player or TV).

1

Keep in mind you can’t make a digital
recording from an analog source or vice-versa,
so make sure the components you are
recording to/from are hooked up in the same
way (see Connecting your equipment on
page 16 for more on connections).

If you want to record a video source, you also
need to use the same type of connection for the
source as for the recorder. For example, you
can’t record a component hooked up to
composite video jacks with a recorder hooked
up to the component video outputs (see
page 23 for more on video connections).

1

Select the source you want to record.

Use the

MULTI CONTROL buttons (or INPUT

SELECTOR).

2

Select the input signal (if necessary).

Press the

button then press

SIGNAL SEL to select the input signal
corresponding to the source component (see
page 38 for more on this).

3

Prepare the source you want to record.

Tune to the radio station, load the CD, video,
DVD etc.

4

Prepare the recorder.

Insert a blank tape, MD, video etc. into the
recording device and set the recording levels.

2

Refer to the instructions that came with the
recorder if you are unsure how to do this. Most
video recorders set the audio recording level
automatically—check the component’s
instruction manual if you’re unsure.

5

Start recording, then start playback of the

source component.

Note

1 If you are recording a video source, you need to use the same type of connection for the source as for the recorder. For example,

you can’t record a component hooked up to composite video jacks with a recorder hooked up to the component video outputs
(see Connecting an HDD/DVD recorder, VCR and other video sources on page 23 for more on video connections).

BD

DVD

INPUT SELECT

SOURCE

SLEEP

TV

CONTROL

TV

INPUT

CH

RECEIVER

DVR

CD

CD-R

ADAPTER

TUNER

EQ

RECEIVER

DTV/TV

2 The receiver’s volume, balance, tone (bass, treble, loudness), and surround effects have no effect on the recorded signal.

RECEIVER

VSX-520_SYXCN_En.book 47 ページ 2010年4月12日 月曜日 午後7時13分

Advertising
This manual is related to the following products: