Pioneer VSX-520-S - Manual (Page 49)

Other connections 09
49
En
English
Français
Español
Connecting Optional Bluetooth
ADAPTER
• Before making or changing connections,
switch off the power.
1 Switch the receiver into standby and
connect Bluetooth ADAPTER to the ADAPTER
PORT located in the rear panel.
2 Switch on the receiver.
3 Press ADAPTER on the remote control to
switch the receiver to ADAPTER input mode. 1
Pairing Bluetooth ADAPTER and
Bluetooth wireless technology
device
“Pairing” must be done before you start
playback of Bluetooth wireless technology
content using Bluetooth ADAPTER. Make sure
to perform pairing first time you operate the
system or any time pairing data is cleared.
“Pairing” is the step necessary to register
Bluetooth wireless technology device to
enable Bluetooth communications.
2 For more
details, see also the operating instructions of
your Bluetooth wireless technology device.
1 Press TOP MENU.
2 Press ENTER to enter PAIRING.
3 Select the PIN code to be used from 0000/
1234/8888 using
/, then press ENTER.
PAIRING blinks.
Important
• You can use any of 0000/1234/8888 PIN
codes. Bluetooth wireless technology
device using any other PIN code cannot
be used with this system.
4 Switch on the Bluetooth wireless
technology device that you want to make
pairing, place it near the system and set it
into the pairing mode.
5 Check to see that the Bluetooth ADAPTER
is detected by the Bluetooth wireless
technology device.
When Bluetooth wireless technology device is
connected:
Bluetooth wireless technology device name
appears in the receiver display.
3
When Bluetooth wireless technology device is
not connected:
NODEVICE appears in the receiver display. In
this case, perform the connection operation
from the side of the Bluetooth wireless
technology device.
Note
1 When the Bluetooth ADAPTER is not plugged into the ADAPTER PORT, NO ADAPTER will be displayed if ADAPTER input
mode is selected.
IN
BD
SURR BACK /
FRONT
HEIGHT
L
(Single)
R
R
L
IN
R
L
IN
IN
OUT
IN
CD
TV/SAT DVD BD
DVR/VCR
MONITOR OUT
P R P B
DVD
COMPONENT VID
ANTENNA
CD-R/TAPE
DVR/VCR CD-R/TAPE
PRE OUT DVD
TV/SAT
COAXIAL
OPTICAL
(CD)
IN
ASSIGNABLE
ASSIGNABLE
OUT
HDMI
1
(CD-R/TAPE)
(DVR/VCR)
IN
AUDIO
FM
UNBAL
75
AM
LOOP
ADAPTER PORT
VIDEO
1
1 2
IN 2
SUBWOOFER
PRE OUT
(OUTPUT 5 V 100 mA MAX)
DVR/VCR
OUT IN
Bluetooth ® ADAPTER
This receiver
2 • Pairing is required when you first use Bluetooth wireless technology device and Bluetooth ADAPTER.
• To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology
device.
3 The system can display alphanumeric characters only. Other characters may not be displayed correctly.
VSX-520_SYXCN_En.book 49 ページ ２０１０年４月１２日 月曜日 午後７時１３分