Pioneer VSX-520-S - Manual (Page 6)

6
En
Flow of settings on the receiver
The unit is a full-fledged AV receiver equipped
with an abundance of functions and terminals.
It can be used easily after following the
procedure below to make the connections and
settings. The colors of the steps indicate the following:
Required setting item
Setting to be made as necessary
1 Before you start
• Checking what’s in the box (page 7)
• Loading the batteries (page 7)

2 Connecting the speakers
Where you place the speakers will have a big
effect on the sound. Place your speakers as
shown below for the best surround sound effect.
• Placing the speakers (page 16)
• Connecting the speakers (page 18)
• Connect the surround back or front height
speakers (page 19)
You can connect only one of either the surround back
speaker or the front height speaker.

3 Connecting the components
For surround sound, you’ll want to hook up
using a digital connection from the BD/DVD
player to the receiver.
• About video outputs connection (page 21)
• Connecting a TV and playback components
(page 22)
• Connecting antennas (page 25)
• Plugging in the receiver (page 26)

Front
Left ( L)
*Front Height
Left ( FHL)
*Front Height
Right ( FHR)
Surround
Left (
SL)
*Surround Back
Left (
SBL)
*Surround Back
Right (
SBR)
Surround
Right (
SR)
Center ( C)
Subwoofer ( SW)
Listening
position
Front
Right (
R)

4 Power On
Make sure you’ve set the video input on your TV to
this receiver. Check the manual that came with
the TV if you don’t know how to do this.

5 The Pre Out Setting (page 42)
(When connecting the front height speakers.)
The Input Assign menu (page 42)
(When using connections other than the
recommended connections.)

6 Use the automatic MCACC setup to set
up your system
• Automatically setting up for surround sound
(MCACC) (page 27)

7 Basic playback (page 29)

8 Adjusting the sound as desired
• Using the various listening modes
• Using the Sound Retriever (page 33)
• Better sound using Phase Control (page 33)
• Using surround back channel processing
(page 34)
• Setting the Up Mix function (page 35)
• Setting the Audio options (page 35)
• Choosing the input signal (page 38)
• Manual speaker setup (page 39)
VSX-520_SYXCN_En.book 6 ページ ２０１０年４月１２日 月曜日 午後７時１３分