Pioneer DVH-330UB - Manual (Page 17)

Advanced operations using
special buttons
Operating the DVD menu
Some DVDs allow you to make a selection from the
disc contents using a menu.
! This function is available for DVD video.
! You can display the menu by pressing the 1/S.
Rtrv while a disc is playing. Pressing 1/S.Rtrv
again lets you start playback from the location se-
lected from the menu. For details, refer to the in-
structions provided with the disc.
1 Press a/b/c/d to select the desired menu op-
tion.
2 Press M.C.
Playback starts from the selected menu item.
Note
You can also perform this operation by pressing
MENU or TOP MENU on the remote control.
Resume playback (Bookmark)
By using the Bookmark function, you can resume
playback from a selected scene the next time the disc
is loaded.
! This function is available for DVD video.
1 During playback, press 3 at the point you want to
resume playback next time.
The selected scene will be bookmarked so that
playback resumes from that point next time. You
can bookmark up to five discs. After that, the old-
est bookmark is replaced by the new one.
To clear the bookmark on a disc, press and hold
3
during playback.
Notes
! You can also perform this operation by press-
ing BOOKMARK on the remote control.
To perform this function, set the remote con-
trol to
DVD mode.
! You can also bookmark a disc by pressing and
holding h (eject) at the point you want to
bookmark. Next time you load the disc, play-
back will resume from the bookmarked point.
Note that you can only bookmark one disc
using this method. To clear the bookmark on a
disc, press h (eject).
Changing audio language during
playback (Multi-audio)
With DVDs that provides audio playback in different
languages and different audio systems (Dolby Digital,
DTS, etc.), you can switch between languages/audio
systems during playback.
! This function is available for DVD video, DivX and
Video CD.
1 Press 4 during playback.
The audio selection icon is displayed for eight
seconds.
2 Press 4 while the audio selection icon is dis-
played.
The audio changes each time you press
4.
Notes
! You can also perform this operation by press-
ing AUDIO on the remote control.
! With some DVDs and DivX, switching between
languages/audio systems may only be possi-
ble using a menu display.
! You can also switch between languages/audio
systems using DVD setup menu. For details,
refer to Setting the audio language on page 23.
! Only digital output of DTS audio is possible. If
the unit
’s optical digital outputs are not con-
nected, select an audio setting other than
DTS.
! Display indications such as Dolby D and Mch
indicate the audio system recorded on the
DVD and DivX. Depending on the setting, play-
back may not be with the same audio system
as that indicated.
! Performing this operation during fast forward/
fast reverse, pause or slow motion playback
returns you to normal playback.
En
17
Section
02
Operating
this
unit
Operating this unit