Pioneer DVH-330UB - Manual (Page 22)

Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
REPEAT (repeat play)
Refer to REPEAT (repeat play) on page 19.
However, the repeat play ranges you can select are
different from that of the built-in DVD player. The re-
peat play ranges of the USB portable audio player/
USB memory are:
! TRACK – Repeat just the current file
! FOLDER – Repeat the current folder
! ALL – Repeat all files
RANDOM (random play)
Refer to RANDOM (random play) on page 19.
ROTATION (picture rotation)
! This function is available for JPEG files.
Refer to
ROTATION (picture rotation) on page 19.
PAUSE (pause)
Refer to PAUSE (pause) on page 19.
S.RTRV (advanced sound retriever)
! This function is available for compressed audio
files.
Refer to S.RTRV (advanced sound retriever) on page
19.
Switching the information display
The operation is the same as that of the built-
in DVD player.
Refer to Switching the information display on
page 19.
Audio Adjustments
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
FAD/BAL (fader/balance adjustment)
1 Press M.C. to display the setting mode.
2 Press M.C. to cycle between fader (front/rear) and
balance (left/right).
3 Turn M.C. to adjust speaker balance.
EQUALIZER (equalizer recall)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the equalizer.
DYNAMIC —VOCAL—NATURAL—CUSTOM—
FLAT —POWERFUL
3 Press M.C. to confirm the selection.
TONE CTRL (equalizer adjustment)
! Adjusted equalizer curve settings are stored in
CUSTOM.
1 Press M.C. to display the setting mode.
2 Press M.C. to select BASS (bass)/MID (mid)/TRE-
BLE (treble).
3 Turn M.C. to adjust the level.
Adjustment range: +6 to –6
LOUDNESS (loudness)
Loudness compensates for deficiencies in the low-
and high-frequency ranges at low volume.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
OFF (off) —LOW(low)—HIGH (high)
3 Press M.C. to confirm the selection.
SLA (source level adjustment)
SLA (Source level adjustment) lets you adjust the vo-
lume level of each source to prevent radical changes
in volume when switching between sources.
When selecting FM as the source, you cannot switch
to
SLA.
! Settings are based on the FM volume level, which
remains unchanged.
! The MW/LW volume level can also be adjusted
with this function.
! Video CD, CD, compressed audio and DivX are
automatically set to the same source level adjust-
ment volume.
1 Press M.C. to display the setting mode.
2 Turn M.C. to adjust the source volume.
Adjustment range: +4 to –4
3 Press M.C. to confirm the selection.
En
22
Section
02 Operating this unit