Pioneer DVH-330UB - Manual (Page 9)

Using the remote control
operation mode switch
There are two remote control operation modes
on the remote control. If you want to operate
this unit by remote control, select
DVH mode.
In this case, both the head unit
’s buttons and
remote control can control this unit.
DVH mode operation
When operating this unit by remote control,
the mode is normally switched to
DVH.
DVD mode operation
If you switch the mode to DVD, the thumb pad
and 0 to 10 operations are changed for the
DVD player.
% When you want to operate the follow-
ing functions, switch the mode to DVD:
! When operating the DVD menu by using
the thumb pad. (Refer to Operating the DVD
menu on page 14.)
! When operating the PBC menu by using 0
to 10. (Refer to PBC playback on page 14.)
! When specifying title or track by using 0 to
10. (Refer to Specifying title on page 15 and
Specifying track on page 15.)
! When operating the DVD setup menu by
using the thumb pad. (Refer to Setting up
the DVD player on page 23.)
Display indication
1
2
3 5 7 9 a b c de f
4 6 8
Indicator Operation
1
Main dis-
play sec-
tion
! Tuner: band and frequency
! RDS: program service name,
PTY information and other lit-
eral information
! Built-in DVD player and USB:
elapsed playback time and lit-
eral information
2 (artist)
The disc (track) artist name is dis-
played.
3 (disc)
The disc (album) name is dis-
played.
4 (song)
The track (song) name is dis-
played.
A playable file is displayed during
viewing the file name list of disc
and a USB storage device.
5 c
An upper tier of the folder or
menu exists.
6 (list)
The list function is being oper-
ated.
7 d
A lower tier of the folder or menu
exists.
8 LOC Local seek tuning is on.
9
LOUD
(loudness)
The loudness is on.
a
(TA)
indicator
TA function is on.
b
(TP)
indicator
A TP station is tuned in.
c
(AF)
indicator
AF (alternative frequencies
search) function is on.
d 5 (stereo)
Receiving the stereo broadcast-
ing.
e (repeat) Track or folder repeat is on.
f
(ran-
dom)
Random play is on.
Note
When you set the display connection (refer to
V.OUT (display connection) on page 28) to on, the
indicators of
2 to 7 do not appear.
En
9
Section
02
Operating
this
unit
Operating this unit