05 preparation, Installing the plasma television, Moving the plasma television – Pioneer PDP-5080XA User Manual

Page 14: Preparation, Preparation 05, Chapter 5

Advertising
background image

Preparation

05

14

En

Chapter 5

Preparation

Installing the plasma television

Location

• Avoid direct sunlight. Maintain adequate ventilation.

Caution

• If you do not leave sufficient space above the plasma television,

it will not receive enough ventilation and will not operate
properly.

• Pioneer will not be responsible for accident or damage caused

by inadequate installation or stabilization, erroneous operation,
remodeling or natural disasters.

Note

• Allow enough space around the upper and back parts when

installing to ensure adequate ventilation of the rear of the unit.

• Be sure to install the plasma television in a flat, stable location.

Using the optional Pioneer stand
(for PDP-5080XA only)

For details on installation, refer to the instruction manual supplied
with the stand.

Using the optional Pioneer speakers
(for PDP-5080XA only)

For details on installation, refer to the instruction manual supplied
with the speakers.

Moving the plasma television

When installing on a rack, etc., hold the plasma television as shown
below. Because the plasma television is heavy, be sure to have
someone help you when moving it.

(for PDP-5080XA)

Note

• Do not use the speaker to support the weight of the plasma

television.

• Always remove the speakers before moving the plasma

television. Do not hold the plasma television by the speaker
mounting fittings.

(for PDP-4280XA)

Over 50 cm

Over
10 cm

Advertising
This manual is related to the following products: