Pioneer PDP-5080XA - Manual (Page 52)

Using the HDMI Control 11
52
En
HD AV Converter mode
In the HD AV Converter mode, functions and menus unique to the
HD AV Converter are available as follows:
Channel display
In the HD AV Converter mode, a channel display appears as one of
the input terminals (INPUT 1 to INPUT 5) selected. The input
terminal displayed at the top of the screen is for the HD AV
Converter connected, followed by “HD AV Converter”.
Input selection for the HD AV Converter
In the HD AV Converter mode, you can select INPUT 1 to INPUT 5
on the HD AV Converter using “INPUT 1 to INPUT 5” on the remote
control unit or
INPUT on the right side of the plasma television.
Menu setting download
In the HD AV Converter mode, settings in the following menus for
the plasma television’s “INPUT 1 to INPUT 5” are transferred to
“INPUT 1 to INPUT 5” on the HD AV Converter connected:
• Picture quality settings in “Picture”
• Sound settings in “Sound”
• HDMI-related settings in “HDMI Input” for “Option”
Like the plasma television, these settings can be changed in each
of INPUT 1, INPUT 2, INPUT 3, INPUT 4 or INPUT 5 on the HD AV
Converter. If you exit the HD AV Converter mode after having
changed the settings, the changed settings are transferred to each
INPUT on the plasma television.
Note
• A Pioneer HD AV Converter is required to use the HD AV
Converter mode. Check the Pioneer Web site (see cover) for
updated information on the HD AV Converter.
• When using an HD AV Converter, you also need to enter the
setting on the HD AV Converter. For details, refer to the
operation manual that came with the HD AV Converter.
• Do not select “Enable” in the “HD AV Converter” menu if you do
not use an HD AV Converter.
• When selecting “Enable” for the “HD AV Converter” menu, be
sure to connect the HD AV Converter to INPUT 4 on the plasma
television.
• In the HD AV Converter mode, only video and audio signals that
are input from “INPUT 1 to INPUT 5” on the HD AV Converter
connected to INPUT 4 on the plasma television will be displayed
and output. Do not connect other devices than a decoder to
INPUT 1 to INPUT 3 or INPUT 5. When connecting a decoder,
make sure to use INPUT 1 on the plasma television (see
Selecting a decoder input terminal on page 25 and Connecting a
decoder on page 41).
• You cannot connect and use an AV system and HD AV
Converter at the same time.
HD AV
Converter
STANDARD
CINEMA 14:9
INPUT 3
Rear view
DVD recorder BD player
HDMI compliant cable
(HDMI cable having the
HDMI mark)
HDMI compliant cable
(HDMI cable having the
HDMI mark)
HD AV
Converter
Connect to INPUT 4