Pioneer DEH-P9300R - Manual (Page 31)

S
toring and recalling services
Storing services
1. Press NEXT to display “1” – “6”.
Press NEXT until “1” – “6” appears.
2. When you find a service that you want to
store in memory, press and hold any of
the buttons 1 – 6 until the preset number
stops flashing.
The service is stored in memory under the
selected button.
Recalling services
1. Press NEXT to display “1” – “6”.
Press NEXT until “1” – “6” appears.
2. Press any of the buttons 1 – 6 to recall
the service preset under that button.
Note:
• You can also use
5 or ∞ to recall services memo-
rized under the buttons 1 – 6.
C
hanging a band
• Press BAND to select the desired band.
Press BAND repeatedly to switch between
the following bands:
DAB 1
=
DAB 2
=
DAB 3
S
witching the display
• Press DISP to select the desired display.
Press DISP repeatedly to switch between
the following displays:
FORM 1
SERVICE (service label)
=
COMPONENT
(service component label)
=
D.TEXT
(dynamic label segment head line)
=
ENSEMBLE (ensemble label)
=
PTY (PTY
label)
FORM 2
SERVICE (service label) and COMPO-
NENT (service component label)
=
D.TEXT (dynamic label segment head line)
=
SERVICE (service label) and ENSEM-
BLE (ensemble label)
=
SERVICE (service
label) and PTY (PTY label)
Note:
• With a service component that has no service com-
ponent label or dynamic label, the display is blank
when you switch to service component label and
dynamic label.
S
witching the road traffic flash
and transport flash on or off
• Press TA to turn the road traffic flash and
transport flash on.
The “
3
TRFC” or “T” indicator lights.
• Press TA again to turn the road traffic flash
and transport flash off.
Canceling road traffic flash and transport
flash interruptions part way through
• To cancel a road traffic flash or transport
flash interruption and return to the origi-
nal source, press the TA during an
announcement interruption.
30
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS