Detaching and replacing the front panel, Heft protection, Detaching the front panel – Pioneer DEH-P9300R User Manual

Page 45: Replacing the front panel, Warning tone, Automatic opening function

Advertising
background image

Detaching and Replacing the Front Panel

44

ENGLISH

ESPAÑOL

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

T

heft protection

The front panel of the head unit is detachable to
discourage theft.

Precaution:
• Never use force or grip the display tightly when

removing or replacing the front panel.

• Avoid subjecting the front panel to excessive

shocks.

• Keep the front panel out of direct sunlight and high

temperatures.

• A few seconds after turning the ignition switch to

ON or OFF, the front panel automatically moves.
When this happens, your fingers may be caught, so
keep your hands away from the panel.

• When removing the front panel, be sure to press the

corrugated release section on the rear of the front
panel while pulling.

Detaching the front panel

1. Press and hold EJECT to open the front

panel.

2. Slide the front panel toward you and

remove it.

Take care not to grip the front panel tightly
or drop it.

3. Use the protective case provided to

store/carry the detached front panel.

Replacing the front panel

1. Make sure the inner cover is closed.

2. Replace the front panel by clipping it into

place.

Warning tone

If the front panel is not detached within five sec-
onds after the ignition is turned off, the warning
tone will sound to remind you to detach the
front panel.

Note:
• You can cancel the warning tone function. (Refer to

page 47.)

Automatic opening function

If the front panel is not detached within five sec-
onds after the ignition is turned off, this function
will open the panel to remind you to detach it.

Note:
• You can cancel the automatic opening function.

(Refer to page 47.)

Release section

Advertising