Pioneer VSX-924-S - Manual (Page 49)

49
Basic playback
05
Pairing with the unit (Initial registration)
In order for the unit to playback music stored on a Bluetooth capable device, pairing must first be performed.
Pairing should be performed when first using the unit with the Bluetooth capable device, or when the pairing data
on the device has been erased for any reason. Pairing is a step required to allow communication using Bluetooth
wireless technology to be carried out.
! Pairing is performed the first time that you use the unit and the Bluetooth capable device together.
! In order to allow communication using Bluetooth wireless technology to take place, pairing must be performed
on both the unit and the Bluetooth capable device.
! After pressing the BT ADPT and switching to BT AUDIO input, perform the pairing procedure on the Bluetooth
capable device. If pairing has been performed correctly, you will not need to perform the pairing procedures for
the unit as shown below.
Please refer to the user’s manual for your Bluetooth capable device for more details.
1 Press u STANDBY/ON and turn the power to the unit on.
2 Press BT ADPT.
The unit switches to BT AUDIO and WAITING DEVICE will be displayed on the front panel of the unit.
3 Turn on the power to the Bluetooth capable device that you wish to pair with, and
perform pairing procedure on it.
Pairing will start.
! Place the Bluetooth capable device close to the unit.
! Please refer to the user’s manual for your Bluetooth capable device for details on when pairing can be per-
formed and the procedures required for pairing.
! When PIN code entry is requested, enter 0000. (This unit does not accept any PIN code setting other than
0000.)
4 Confirm on the Bluetooth capable device that pairing has been completed.
If pairing with the Bluetooth capable device has been completed correctly, CONNECTED will be displayed on the
front panel of the unit.
Listen to music on the unit from a Bluetooth capable device
1 Press BT ADPT.
The unit will switch to BT AUDIO input.
2 A Bluetooth connection will be created between the Bluetooth capable device and the
unit.
Procedures for connecting to the unit should be performed from the Bluetooth capable device.
! Please refer to the user’s manual for your Bluetooth capable device for details of the connection procedures.
! The unit is automatically connected with the Bluetooth capable device that it was last connected to. To con-
nect to a different Bluetooth capable device, terminate the connection with the device that was automatically
established and connect to a different device.
3 Playback music from the Bluetooth capable device.
This receiver’s remote control buttons can be used for basic playback of files stored on Bluetooth wireless tech-
nology devices.
! Depending on the Bluetooth wireless technology device you use, operation may differ from what is shown in
the remote control buttons.
4 While listening to a source, set the remote control to the receiver operation mode, then
press ADV repeatedly to select SOUND RETRIEVER AIR.