Pioneer ANH-P9R - Manual (Page 31)

"
(
1
*
/,6+
5'6
8VLQJ DOWHUQDWLYH IUHTXHQF\ $)
If you are listening to a broadcast and the reception becomes weak or there are other
problems, this product will automatically search for a different station in the same
network which is broadcasting a stronger signal.
 Q r††ÃAVI8ÃhqÇurÃƒ r††Ã6AГ‡‚Г†ryrp‡Ã‡urÃ6AÀ‚qr
! Q r††Ã6AГ‡‚Г‡ˆ Г‡urГ6AГsˆp‡v‚Ã‚
The light illuminates.
‡ Press 6A again to turn the AF function off.
‡ When the AF mode is exited while AF is on, “AF” appears on the basic display.
I‚‡r†
‡ AF tunes the receiver only to RDS stations when you use seek tuning or BSM auto memory
with the AF function on.
‡ When you recall a preset station, the tuner may update the preset station with a new
frequency from the station’s AF list. (This is only available when using presets on the FM-1
and FM-2 bands.) No preset number appears on the display if the RDS data for the station
received differs from the data for the originally stored station.
‡ Sound may be temporarily interrupted by another program during an AF frequency search.
‡ When the tuner is tuned to a non-RDS station, the “AF” indicator flashes.
‡ The AF function can be turned on or off independently for each FM band.
8VLQJ WKH 3, VHHN IXQFWLRQ
The tuner searches for another frequency broadcasting the same program. “PI Seek”
appears on the display and the radio volume is muted during a PI seek. The muting is
discontinued after completion of the PI seek, whether or not the PI seek has
succeeded. If the PI seek is unsuccessful, the tuner returns to the previous frequency.
QDÆrrx
If you are listening to a broadcast and the reception becomes weak or if this product
fails to find a suitable alternative frequency, this product will automatically search for
a different station with the same program.
6ˆ‡‚ÃQDÆrrxÃs‚ à r†r‡Ã†‡h‡v‚
When preset stations cannot be recalled, as when traveling long distances, this
product can be set to perform PI seek during preset recall.
The default setting for auto PI seek is off.
I‚‡r
‡ Refer to “Switching the auto PI seek” on page 51.
/LPLWLQJ VWDWLRQV WR UHJLRQDO SURJUDPPLQJ
When AF is used to automatically retune frequencies, the regional function limits the
selection to stations broadcasting regional programs.
 Q r††ÃAVI8ÃhqÇurÃƒ r††ÃS@BГ‡‚Г†ryrp‡Ã‡urà rtv‚hyÀ‚qr
! Q r††ÃS@BГ‡‚Г‡ˆ Г‡urГ rtv‚hyÃsˆp‡v‚Ã‚
The light illuminates.
‡ Press S@B again to turn the regional function off.
I‚‡r†
‡ Regional programming and regional networks are organized differently depending on the
country (i.e., they may change according to the hour, state or broadcast area).
‡ The preset number may disappear from the display if the tuner tunes in to a regional station
which differs from the originally set station.
‡ The regional function can be turned on or off independently for each FM band.
5HFHLYLQJ WUDIILF DQQRXQFHPHQWV
The TA (traffic announcement standby) function lets you receive traffic
announcements automatically, no matter what source you are listening to. The TA
function can be activated for both a TP station (a station that broadcasts traffic
information) or an enhanced other network’s TP station (a station carrying information
which cross-references TP stations).
Uˆ vtÇurÃU6Ãsˆp‡v‚Г‚Г‚ Г‚ss
 Q r††ГГ‚ ГГ‡‚Г‡ˆrГvГ‡‚ÃhÃUQ Ãruhprq‡ur Ár‡‚ x†ÃUQƇh‡v‚
The “TRFC” indicator lights when the tuner is tuned in to a TP station or an enhanced
other network's TP station.
! Q r††ГU6Г‡‚Г‡ˆ Г‡urÃU6Ãsˆp‡v‚Ã‚
The “  TRFC” indicator lights, indicating that the tuner is waiting for traffic
announcements.
‡ Press U6 again when no traffic announcement is being received to turn the TA
function off.
MAN-ANH-P9R-GB.fm Page 31 Tuesday, June 4, 2002 1:39 PM