Pioneer ANH-P9R - Manual (Page 46)

#%
(1
*
/,6+
$XGLR $GMXVWPHQWV
5HFDOOLQJ HTXDOL]HU FXUYHV
There are seven stored equalizer curves which you can easily recall at any time. Here
is a list of the equalizer curves:
 Q r††Ã@@RГ‡‚Г†v‡puГ‡‚Г‡urÃrh†’Ãr„ˆhyv“r À‚qr
! Q r††ÃI@YUГ‡‚Г†v‡puÃir‡rrÃ³8TUH!´ÃhqÇur‡ur Æryrp‡v‚†Ãpˆ ‰r†
" Q r††Ã‡urÃp‚ r†ƒ‚qvtГiˆ‡‡‚Г‡‚Г†ryrp‡Ã‡urÃqr†v rqÃr„ˆhyv“r Ãpˆ ‰r
‡ “CSTM1” and “CSTM2” are adjusted equalizer curves.
‡ A separate “CSTM1” curve can be created for each source. (The Built-in CD player
and Multi-CD player are set to the same Equalizer Curve Adjustment setting
automatically when using the AVH-P6400CD.)
‡ If you make adjustments when a curve other than “CSTM2” is selected, the equalizer
curve settings are memorized in “CSTM1”.
‡ A “CSTM2” curve can be created common to all sources.
‡ If you make adjustments when the “CSTM2” curve is selected, the “CSTM2” curve
is updated.
‡ When “FLAT” is selected no supplement or correction is made to the sound. This is
useful to check the effect of the equalizer curves by switching alternatively between
“FLAT” and a set equalizer curve.
I‚‡r†
‡ You can also use  and  to select the desired equalizer curve.
‡ If you do not operate the function within about eight seconds, the display is automatically
returned.
‡ “SW2” is displayed only when the subwoofer output is on in the subwoofer output mode
(SW1).
‡ “SLA” is not displayed when you select FM tuner as the source.
7ˆ‡‡‚ @„ˆhyv“r Ãpˆ ‰r
FLAT Flat
S.BASS Super bass
PWRFL Powerful
NATRL Natural
VOCAL Vocal
CSTM1 Custom1
CSTM2 Custom2
$XGLR PHQX
I‚‡r†
‡ If you do not operate the function within about 30 seconds, the display is automatically
returned.
8VLQJ EDODQFH DGMXVWPHQW
You can select a fader/balance setting that provides an ideal listening environment in
all occupied seats.
 Q r††Ã6V9DPГ‡‚Г†ryrp‡ГA7Гshqr ihyhpr
! Q r††ГГ‚ ГГ‡‚Ãhqwˆ†‡Ãs ‚‡ rh ƃrhxr Ãihyhpr
Each press of  or  moves the front/rear speaker balance towards the front or the
rear.
‡ “FADER F15” – “FADER R15” is displayed as the front/rear speaker balance moves
from front to rear.
‡ “FADER FR00” is the proper setting when only two speakers are used.
‡ When the PREOUT setting is “SW”, you cannot adjust front/rear speaker balance.
Refer to “Switching the rear output setting” on page 50.
" Q r††ГГ‚ ГГ‡‚Ãhqwˆ†‡Ãyrs‡ vtu‡Ã†ƒrhxr Ãihyhpr
Each press of  or  moves the left/right speaker balance towards the left or the right.
‡ “BALANCE L09” – “BALANCE R09” is displayed as the left/right speaker balance
moves from left to right.
$GMXVWLQJ HTXDOL]HU FXUYH
You can adjust the level, the frequency and the Q factor.
The audio menu has the following
functions:
Level (dB)
Center frequency Frequency (Hz)
Q=2W
Q=2N
MAN-ANH-P9R-GB.fm Page 46 Tuesday, June 4, 2002 1:39 PM