Pioneer DEH-P7000UB - Manual (Page 12)

Tuner
Basic Operations
RDS
1 Band indicator
2
5 (stereo) indicator
Appears when the selected frequency is being
broadcast in stereo.
3 Preset number indicator
4 Signal level indicator
Shows the radio wave strength.
5 TP ( ) indicator
Appears when a TP station is tuned in.
6 News ( ) indicator
Appears when the set news program is re-
ceived.
7 Program service name
8 PTY label indicator
9 TEXT indicator
Shows when the radio text is received.
Non-RDS or MW/LW
1 Band indicator
2
5 (stereo) indicator
Appears when the selected frequency is being
broadcast in stereo.
3 LOC indicator
Appears when local seek tuning is on.
4 Preset number indicator
5 Signal level indicator
Shows the radio wave strength.
6 Frequency indicator
% Select a band
Press
BAND.
# Band can be selected from among FM1, FM2,
FM3 or MW/LW.
% Manual tuning (step by step)
Push
MULTI-CONTROL left or right.
% Seek tuning
Push and hold
MULTI-CONTROL left or right
for about one second and release.
# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right, you can skip stations. Seek tuning starts as
soon as you release
MULTI-CONTROL.
Notes
! This unit’s AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 14).
! RDS service may not be provided by all sta-
tions.
! RDS functions such as AF and TA are only ac-
tive when your radio is tuned to an RDS sta-
tion.
Storing and recalling broadcast
frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
! Six stations for each band can be stored in
memory.
1 Press LIST.
Preset screen is displayed.
Operating this unit
En
12
Section
02