Pioneer DEH-P7000UB - Manual (Page 16)

Using news program interruption
When a news program is broadcast from a
PTY code news station, the unit automatically
switches to the news broadcast station. When
the news program ends, reception of the pre-
vious program resumes.
% Press NEWS and hold to turn on news
program interruption.
Press
NEWS until NEWS ON appears in the
display.
# To turn off news program interruption, press
NEWS and hold until OFF appears in the display.
# A news program can be canceled by pressing
NEWS.
Note
You can also turn on or off news programs in the
menu that appears by using
MULTI-CONTROL.
Using radio text
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the name of the currently broadcast
song and the name of the artist.
! The tuner automatically memorizes the
three latest radio text broadcasts received,
replacing text from the least recent recep-
tion with new text when it is received.
Displaying radio text
You can display the currently received radio
text and the three most recent radio texts.
1 Press DISP and hold to display radio
text.
Radio text for the currently broadcasting sta-
tion is displayed.
# You can cancel radio text display by pressing
DISP or BAND.
# When no radio text is received, No text ap-
pears in the display.
2 Push MULTI-CONTROL left or right to
recall the three most recent radio texts.
Pushing
MULTI-CONTROL left or right
switches between the current and the three
radio text data displays.
# If there is no radio text data in memory the dis-
play will not change.
3 Push MULTI-CONTROL up or down to
scroll.
Push
MULTI-CONTROL up to go to the begin-
ning. Push MULTI-CONTROL down to scroll
the radio text data.
Storing and recalling radio text
You can store data from up to six radio text
transmissions for buttons
1 to 6 on the remote
control.
1 Display the radio text you want to
store in memory.
Refer to Displaying radio text on this page.
2 Press and hold any buttons 1 to 6 on
the remote control to store the selected
radio text.
The memory number will display and the se-
lected radio text will be stored in memory.
The next time you press the same button on
the remote control in the radio text display the
stored text is recalled from memory.
Operating this unit
En
16
Section
02