Pioneer DEH-P7000UB - Manual (Page 34)

Adjusting initial settings
1 1 1
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
! Shows the function status.
1 Press SRC and hold until the unit turns
off.
2 Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3 Turn MULTI-CONTROL to select one of
the initial settings.
Turn
MULTI-CONTROL to switch between the
functions in the following order.
Language select (language selection)
—
Calendar (calendar)
—Clock (clock)—
Off clock (off clock)
—FM step (FM tuning
step)
—Auto PI (auto PI seek)—Warning tone
(warning tone)
—Face auto open (face auto
open)
—AUX1 (auxiliary input 1)—AUX2 (aux-
iliary input 2)
—Dimmer (dimmer)—
Brightness (brightness) —S/W control (rear
output and subwoofer controller)
—Mute
(sound muting/attenuation)
—Demonstration
(feature demo)
—Reverse mode (reverse
mode)
—Ever-scroll (ever scroll)—BT AUDIO
(Bluetooth audio)
—Pin code input (pin code
input)
—BT Version info. (Bluetooth version
information)
Use the following instructions to operate each
particular setting.
# You can also select the function by pressing
FUNCTION on the remote control.
# BT AUDIO and Pin code input can be se-
lected only when Bluetooth adapter (e.g., CD-
BTB200) is connected to this unit.
# To cancel initial settings, press BAND.
Selecting the display language
For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
! For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
1 Display the intial setting menu.
2 Use MULTI-CONTROL to select
Language select.
3 Press MULTI-CONTROL to select the lan-
guage.
Each press of
MULTI-CONTROL selects lan-
guages in the following order:
English
—Français—Italiano—Español—
Deutsch
—Nederlands—РУССКИЙ
Setting the date
The calender display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
! For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
1 Display the intial setting menu.
2 Use MULTI-CONTROL to select
Calendar.
Calendar appears in the display.
3 Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Pushing
MULTI-CONTROL left or right will se-
lect one segment of the calendar display:
Day
—Month—Year
Initial Settings
En
34
Section
04