Pioneer DEH-P7000UB - Manual (Page 26)

2 Use MULTI-CONTROL to select a cate-
gory.
Turn to change the category. Press to select.
3 Press LIST to switch to alphabet search
mode.
4 Turn MULTI-CONTROL to select a de-
sired alphabet.
5 Press MULTI-CONTROL to display the al-
phabetical list.
# If alphabet search is aborted, Not Found is
displayed.
Displaying text information on
iPod
% Press DISP to select the desired text in-
formation.
Play time
— : artist name and
: song title
— : artist name and
: album name
— :
album name and : song title
— : song title
and play time
— : song title,
: artist name
and : album name
# If the characters recorded on the iPod are not
compatible with this unit, those characters are
not displayed.
Notes
! You can scroll the text information to the left
by pressing and holding DISP.
! When Ever Scroll is set to ON at the initial set-
ting, text information scrolls continuously in
the display. Refer to Switching the ever scroll
on page 38.
Introduction of advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3 Turn MULTI-CONTROL to select the
function.
Play mode (repeat play)
—Shuffle mode
(shuffle)
—Shuffle all (shuffle all)—
Link search (link search)
—Control mode
(control mode)
—Pause (pause)—
Audiobooks (audiobook speed)
—
Sound Retriever (sound retriever)
Function and operation
Play mode, Pause and Sound Retriever op-
erations are basically the same as that of the
built-in CD player.
Function name Operation
Play mode
Refer to Selecting a repeat play
range on page 20.
However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
repeat play ranges of the iPod
are:
! Repeat One – Repeat the cur-
rent song
! Repeat All – Repeat all songs
in the selected list
Pause
Refer to Pausing playback on page
21.
Sound Retriever
Refer to Using Sound Retriever on
page 21.
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the ordinary display, press BAND.
! If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.
! Control mode (control mode) function is
available only for iPod nano (second genera-
tion).
! When Control mode is on, only
Control mode and Sound Retriever can be
operated.
Operating this unit
En
26
Section
02