Pioneer AVIC-F250 - Manual (Page 62)

Black plate (62,1)
Customising the regional
settings
These settings allow you to customise this sys-
tem for your local language, measurement
units, time and date settings and formats, as
well as to choose the time zone.
1 Display the settings screen.
= For details of the operations, refer to Dis-
playing the settings screen on page 56.
2 Touch [Regional].
3 Touch the setting item.
! Program Language:
This key displays the current written lan-
guage of the user interface. By touching
the key, you can select a new language
from the list of available languages. This
system will restart if you change this set-
ting.
! Units and Formats:
You can set the distance units to be used by
this system. This system may not support
all the listed units in some voice guidance
languages.
Select between 12 and 24 hours time dis-
play and the various international date dis-
play formats.
You can also set other country specific
units used to display different values in this
system.
! Time Zone:
By default, time zone is taken from the map
information and adjusted by your current lo-
cation. Here you can set time zone and
summer time manually.
Setting the Trip Monitor
Trip logs contain useful information about
your trips. Trip logs can be saved manually
when you reach your destination or you can
turn on the automatic saving here. You can ac-
cess these logs in the
“Trip Monitor”. “Trip
Monitor
” is available from the “More...”
menu.
1 Display the settings screen.
= For details of the operations, refer to Dis-
playing the settings screen on page 56.
2 Touch [Trip Monitor].
3 Touch [More], then touch [Trip Monitor
Settings].
4 Touch the setting item.
! Enable Auto-Saving:
Trip monitor can record statistical data of
your trips. If you need these logs later, you
can let this system save them automatically
for you.
! Trip Database Size:
You cannot select this. This line shows the
current size of the trip database, the sum of
all trip and track logs saved.
! Save Track Log:
Track logs, the sequence of the positions
given by the GPS receiver, can be saved to-
gether with trip logs. They can later be dis-
played on the map. You can let this system
save the track log whenever it saves a
trip.
Starting the configuration
wizard
Modify the basic software parameters set dur-
ing the initial setup process.
= For details, refer to On first-time startup on
page 17.
1 Display the settings screen.
= For details of the operations, refer to Dis-
playing the settings screen on page 56.
2 Touch [Start Configuration Wizard].
<127075024473>62
Engb
62
Chapter
11 Customising preferences