Pioneer SPH-DA110 - Manual (Page 16)

Using the radio
04
Chapter
16
Engb
Starting procedure
1 Press the Home button to display the
Home screen.
2 Tap [Radio] on the Home screen.
Ü For details, refer to Home screen on page
12.
3 Use the touch panel keys on the screen
to control the radio.
Reading the screen
 234



5 
 Preset channel keys
Ü For details, refer to Storing the strongest
broadcast frequencies on page 17.
2 Current broadcast information
The following information is displayed:
• : Programme service (PS) name
• PTY information
•
: Song title
• : Artist name
3 TRFC indicator
Shows the status of traffic announce-
ments.
Ü
For details, refer to Interruption icon
status on page 19.
4 NEWS indicator
Shows the status of news programmes.
Ü
For details, refer to Interruption icon
status on page 19.
5 TEXT indicator
Shows when radio text is received.
 STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
 Signal level indicator
Shows the signal strength of the selected
frequency.
 Frequency indicator
 Frequency scale
 Current time
Using the touch panel keys

5

2 3
4
   -  ^
 Recalls the desired broadcast frequency.
Holding down the key stores the current
tuning frequency in memory.
Ü
For details, refer to Recalling broadcast
frequencies on page 17.
2 Switches the band between FM1, FM2 and
FM3. Also switches to the FM band while
receiving the MW/LW band.
3 Switches to the MW/LW band while receiv-
ing the FM band.
4 Searches for an RDS station using PTY in-
formation.
Ü
For details, refer to Searching for an RDS
station using PTY information on page
18 .
5 Raises frequencies in one-step increments.
Holds down the key and the tuner will scan
frequencies until a broadcast strong
enough for good reception is found.