Pioneer SPH-DA110 - Manual (Page 30)

Registering and connecting a Bluetooth device
07
Chapter
30
Engb
4 Tap [Connection] on the “Bluetooth
Connection Menu”.
The registered device list screen appears.
5 Tap on the registered device list.
The system searches for Bluetooth devices
waiting for a connection and displays them in
the list if a device is found.
p When the device is already connected,
becomes inactive.
p Up to 30 devices will be listed in the order
that the devices are found.
6 Wait until your Bluetooth device ap-
pears in the list.
n
If you want to switch between the device
names and Bluetooth device addresses,
tap [Device Name].
p If you cannot find the Bluetooth device that
you want to connect, check that the device
is waiting for a Bluetooth wireless technol-
ogy connection.
7 Tap the Bluetooth device name you
want to register.
p If a PIN code input is required, enter a PIN
code. (The default PIN code is “0000”.)
p If you tap , the system starts searching
for Bluetooth devices waiting for connec-
tion, and displays them in list format when
any devices are detected.
When the message “Paired” appears, the
device is registered in the system.
After the device is successfully registered, a
Bluetooth connection is established from the
system.
The profile icons in the registered device list
screen are appeared and illuminated as
follows.
Icons Conditions
Illuminates when your mobile device is
successfully connected with the HFP
(Hands-Free Profile).
Illuminates when your audio device is
successfully connected with the A2DP
(Advanced Audio Distribution Profile)/
AVRCP (Audio/Video Remote Control
Profile).
Illuminates when the Bluetooth con-
nection is established with the SPP
(Serial Port Profile).
p After pairing, the phone book registered in
the device may be automatically transmit-
ted to this product.