Pioneer SPH-DA110 - Manual (Page 54)

Customising preferences
10
Chapter
54
Engb
Setting the video signal
You can select the suitable video signal setting
for your rear view camera.
p As this function is initially set to “Auto”,
the product will automatically adjust the
video signal setting.
However, the screen may turn black or im-
ages may not be displayed properly when
“Auto” has been selected. Normally, select
the appropriate video signal.
1 Display the “System” screen.
Ü For details, refer to Customising the
system settings on page 48.
2 Tap [Video Signal Setting].
The “Video Signal Setting” screen appears.
3 Tap or to select the desired video
signal.
Auto (default) — PAL — NTSC — PAL-M
—
PAL-N — SECAM
Adjusting the picture
You can adjust the brightness, contrast, col-
our, hue, dimmer and temperature for each
source and rear view camera.
1 Playback the source you want to adjust
the picture.
2 Display the “System” screen.
Ü For details, refer to Customising the
system settings on page 48.
3 Tap [Picture Adjustment].
The picture adjustment screen appears.
4 If you are adjusting the picture adjust-
ment, select the source.
• Rear View: Adjusts the picture for the
rear view camera.
• Source: Adjusts the picture for the
source. The current source name is dis-
played on the picture adjustment screen.
5 Tap any of the following touch panel
keys to select the function to be adjusted.
Picture adjustment items are displayed.
• Brightness: Adjusts the black intensity.
• Contrast: Adjusts the contrast.
• Color: Adjusts the colour saturation.
• Hue: Adjusts the tone of colour (red or
green is emphasized).
• Dimmer: Adjusts the brightness of the
display.
• Temperature: Adjusts the colour tem-
perature, resulting in a better white bal-
ance.
p You can adjust “Hue” only when “Video
Signal Setting” is set to “NTSC”.
p With some rear view cameras, picture ad-
justment may not be possible.