Pioneer AVIC-F8430BT - Manual (Page 142)

Setting the map colour change
between day and night
To improve the visibility of the map during the
evening, you can set the timing for changing
the combination of the map colour.
1 Display the
“Map Settings” screen.
= For details, refer to Displaying the screen for
map settings on page 137.
2 Touch [Day/Night Display].
Each time you touch the key changes the set-
ting.
! Automatic (default):
You can change the colours of a map be-
tween daytime and nighttime according to
whether the vehicle lights are on or off.
! Day:
The map is always displayed with daytime
colours.
p To use this function with “Automatic”, the
orange/white lead of the navigation system
must be connected correctly.
Changing the road colour
You can set the road colour to bluish or red-
dish.
1 Display the
“Map Settings” screen.
= For details, refer to Displaying the screen for
map settings on page 137.
2 Touch [Road Colour].
Each time you touch the key changes the set-
ting.
! Red (default):
Changes to red based road colours.
! Blue:
Changes to blue based road colours.
Changing the setting of
navigation interruption screen
You can set whether to automatically switch to
the navigation screen from the AV screen
when your vehicle approaches a guidance
point such as an intersection.
1 Display the
“Map Settings” screen.
= For details, refer to Displaying the screen for
map settings on page 137.
2 Touch [AV Guide Mode].
Each time you touch the key changes the set-
ting.
! On (default):
Switches from the AV operation screen to
the map screen.
! Off:
Does not switch the screen.
p This setting is effective only when “Close
Up View ” is set to “On”.
Selecting the
“Quick Access”
menu
Select items to display on the map screen. In
the list displayed on screen, the items with red
tick marks are displayed on the map screen.
Touch the item you want to display and then
touch [
OK] when a red check appears. You
can select up to five items.
1 Display the “Map Settings” screen.
= For details, refer to Displaying the screen for
map settings on page 137.
2 Touch [Quick Access Selection].
The
“Quick Access Selection” screen appears.
3 Touch the item that you want to set in
“Quick Access”.
You can select the following items:
p Settings marked with an asterisk (*) show
that these are default or factory settings.
!
: Registration*
Engb
142
Chapter
27 Customising preferences