Pioneer AVIC-F8430BT - Manual (Page 50)

After touching [ Diversion], the route is recal-
culated taking all traffic jams on your current
route into account.
p [Diversion] will be available only when the
system can find traffic jams.
p Notification icon shows the nearest traffic
information on the route. However, if you
touch [
Diversion], the route is recalculated
by taking into account not only this infor-
mation, but also all traffic jam information
on the route.
= For details, refer to Checking for traffic jams
automatically on the previous page.
# If you touch [List], the “Traffic on Route”
screen appears.
# If you touch
, the message disappears and
the map screen returns.
Selecting traffic
information to display
There are different types of traffic information
that can be received via the RDS-TMC service,
and you can select which types will be incor-
porated and displayed on your navigation sys-
tem.
1 Display the
“Destination Menu” screen.
= For details of the operations, refer to Screen
switching overview on page 18.
2 Touch [Traffic].
The
“Traffic Menu” screen appears.
3 Touch [Traffic Settings].
The
“Traffic Settings” screen appears.
4 Touch [Displayed Traffic Info].
The
“Traffic Type Settings” screen appears.
5 Touch the traffic information item to
display.
A tick mark appears next to the selected traffic
information.
# If you touch [All], you can select all entries. If
you want to deselect all entries, touch [
None].
6 Touch [OK].
The selected traffic information icon is added
to the screen.
7 Touch [OK].
Selecting preferred RDS-TMC
service provider manually
A default preferred TMC service provider for
each country has been set. The navigation sys-
tem tunes to the radio station with good recep-
tion among the preferred RDS-TMC service
providers. If you want to set another preferred
RDS-TMC service provider, you can manually
select one from available RDS-TMC service
providers.
1 Display the
“Destination Menu” screen.
= For details of the operations, refer to Screen
switching overview on page 18.
2 Touch [Traffic].
The
“Traffic Menu” screen appears.
3 Touch [TMC Provider Selection].
4 Touch the desired service provider on
the list.
After touching a service provider, the system
starts tuning to the selected RDS-TMC service
provider. When the tuning is successful, the
system returns to the map display.
Engb
50
Chapter
10 Using traffic information