Pioneer AVIC-F8430BT - Manual (Page 15)

p Connection via a USB hub is not possible.
Plugging in a USB storage device
% Plug a USB storage device into the USB
connector on the vehicle.
Unplugging a USB storage device
% Pull out the USB storage device after
checking that no data is being accessed.
Connecting and
disconnecting an iPod
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! Pioneer cannot guarantee compatibility with
all USB mass storage devices and assumes
no responsibility for any loss of data on media
players, smart phones, or other devices while
using this product.
Connecting your iPod
Using the USB interface cable for iPod en-
ables you to connect your iPod to the naviga-
tion system.
p A USB interface cable for iPod (CD-IU51V)
(sold separately) is required for connection.
p For details about iPod compatibility with
this navigation system, refer to the informa-
tion on our website.
p Connection via a USB hub is not possible.
1 Check that no USB storage device is
connected.
2 Connect your iPod.
To the USB connector
on the vehicle.
To the mini-jack port
on the vehicle.
USB interface cable for iPod
Disconnecting your iPod
% Pull out the USB interface cable for iPod
after checking that no data is being ac-
cessed.
Engb
15
Chapter
02
Basic
operation
Basic operation