Pioneer STZ-D10T-G - Manual (Page 30)

30 En
Configure the power saving settings
By configuring the power saving settings, you can save the battery’s power and reduce the amount of power used.
To configure the power saving settings, select Power Save in the Setup menu.
You can set Display Off and Auto Power Off separately for when operating by battery or AC adapter.
Settings for battery
powered use
Settings for AC adapter
powered use
Power Save
Battery Battery
AC Power
Battery
Display Off Display Off 30 sec.
Auto Power Off Yes
AC Power
Display Off Display Off 30 sec.
Auto Power Off Yes
See the table below for the options available for each setting. The defaults, if not stated, are listed in bold.
Setting What it does Option(s)
Display Off
The display screen will turn off when no activity takes place on the device for a speci-
fied amount of time.
! When the display screen is turned off, you can press any button to turn it back on.
No (Don’t turn off the display screen)
5 sec. (5 seconds)
10 sec. （10 seconds）
30 sec. （30 seconds）
Auto Power Off
You can configure the device so that the power turns off automatically (standby) if
there is no activity or playback is stopped for five minutes. No
Yes
Configuring the display settings
To configure the display brightness, select Display in the Setup menu. You can select from Light / Dark.
Display
Brightness Brightness Light
Confirming the device information
By selecting Information in the Setup menu, you can display Software (the device’s software version), Total Track (the total number of tracks saved),
Used/Remain
(memory used/available), and Software License (the software license agreement for the device).
Information
Software License
Software: *.**
Total Track: ***
Used/Remain: *.*GB/1.5GB
Software License
! Pressing the ENTER button while the Software License is selected shows the details of the software license agreement.
Resetting the device
To entirely restore the device back to the factory default settings, select Reset Setting in the Setup menu.
Reset Setting
No No
Yes
% Choose Yes and then select ENTER.
When Power will turn off automatically. is shown and the device’s power turns off (standby), resetting is complete.