Pioneer STZ-D10T-G - Manual (Page 33)

33 En
Playable music file formats
The music files that the device can play back from the internal memory and USB memory devices are as follows.
Category Extension Stream
Sampling
frequency
Bitrate
MP3 .mp3
MPEG-1 Audio Layer3 32 kHz, 44.1 kHz, 48 kHz
[CBR] 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 kbps
[VBR] 8 kbps to 320 kbps
MPEG-2 Audio Layer3 32 kHz, 44.1 kHz, 48 kHz
[CBR] 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160 kbps
[VBR] 8 kbps to 320 kbps
WMA .wma
WMA7/7.1/8/9/10/11
(This device does not support the WMA9
Pro and WMA lossless encoding.)
32 kHz, 44.1 kHz, 48 kHz
[CBR] 48, 64, 80, 96, 128, 160, 192, 256, 320 kbps
[VBR] 48 kbps to 384 kbps
AAC .aac, .m4a
MPEG-4 AAC LC
(This device does not support the Apple
lossless encoding.)
32 kHz, 44.1 kHz, 48 kHz
[CBR] 16, 20, 24, 28, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256,
320 kbps
[VBR] 16, 20, 24, 28, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256,
320 kbps
WAV .wav LPCM 32 kHz, 44.1 kHz, 48 kHz
! Copyrighted audio files cannot be played back on this device.
! Note that some file formats are not available for playback although they are listed as playable file formats.
! Compressed variable bit rate (VBR) files can be played back, but the elapsed time may not be displayed properly.
! “MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia.”
About iPod/iPhone
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively,
and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compli-
ance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
Apple, iPhone, iPod, iPod shuffle, iPod nano, iPod classic, iPod touch and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.
Cleaning the unit
! Use a polishing cloth or dry cloth to wipe off dust and dirt.
! When the surface is dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then
wipe again with a dry cloth. Do not use furniture wax or cleansers.
! Never use thinners, benzene, insecticide sprays or other chemicals on or near this unit, since these will corrode the surface.