03 connections, Connecting antenna, Using external antennas – Pioneer X-SMC55-S User Manual

Page 11: Connecting to the network through the, Lan interface or wlan antenna, Connections, Connections 03, Chapter 3

Advertising
background image

Connections

03

11

En

Chapter 3:

Connections

CAUTION

• Be sure to turn off the power and unplug the power cord

from the power outlet whenever making or changing

connections.

• Connect the power cord after all the connections

between devices have been completed.

Connecting antenna

Connect the FM wire antenna as shown below. To improve

reception and sound quality, connect external antennas (see

Using external antennas below).

1

Connect the FM wire antenna into the FM

antenna socket.

For best results, extend the FM antenna fully and fix to a wall

or door frame. Don’t drape loosely or leave coiled up.

Using external antennas

To improve FM reception

Use a PAL connector (not supplied) to connect an external FM

antenna.

To customers in Norway and Sweden

CAUTION

• “Apparater som er koplet til beskyttelsesjord via

nettplugg og/eller via annet jordtilkoplet utstyr - og er

tilkoplet et koaksialbasert kabel-TV nett, kan forårsake

brannfare. For å unngå dette skal det ved tilkopling av

apparater til kabel-TV nett installeres en galvanisk

isolator mellom apparatet og kabel-TV nettet.”

• “Apparater som är kopplade till skyddsjord via jordat

vägguttag och/eller via annan utrustning och samtidigt

är kopplad till kabel-TV nät kan i vissa fall medföra risk för

brand. För att undvika detta skall vid anslutning av

apparaten till kabel-TV nät galvanisk isolator finnas

mellan apparaten och kabel-TV nätet.

Connecting to the network
through the LAN interface or
WLAN antenna

By connecting this unit to the network via the LAN interface,

you can play back audio files stored on components on the

network, including your computer, and listen to Internet

Radio stations.
Connect the LAN terminal on this unit to the LAN terminal on

your router (with or without the built-in DHCP server function)

with a straight LAN cable (CAT 5 or higher). Also wireless

connection to the network is possible.
Turn on the DHCP server function of your router. If your router

does not have a built-in DHCP server function, you have to set

up the network manually. For details, see page 24.

Note

• To use services such as Internet Radio, you must

conclude a contract with an Internet service provider.

• Photo or video files cannot be played back.

PHONES

AUDIO IN

ANTENNA

DC IN

18 V

5 V
2.1 A

LAN(10/100)

1

PHONES

AUDIO IN

ANTENNA

DC IN

18 V

5 V
2.1 A

LAN(10/100)

One-touch PAL

connector

75  coaxial

cable

Advertising