Pioneer X-SMC55-S - Manual (Page 25)

Connect to network 08
25
En
A: Using a web browser on a
computer supporting wired LAN to
make connecting settings for the
unit
Make sure that the LAN cable connections has completed
(page 12).
1 Use a LAN cable to connect the unit to the
computer.
2 Connect the AC adapter, and press 
STANDBY/ON.
Wait for about 30 to 40 seconds.
3 Wait for the NETWORK indicator to change
from flashing to steadily lighted red.
This may require up to 90 seconds or so.
4 When the NETWORK indicator lights red,
start your computer’s Web browser, and access
the URL noted below to make settings for this
unit.
The Web Control menu will appear.
For Safari
Press Bookmark icon ( ) at the upper left of the screen.
Click Bonjour list (a), and then select this unit’s name
(“Friendly Name”) (b) in Bookmark.
5 From the menu on the left, select “Network
Configuration”.
If you wish to change the Friendly Name, select “Friendly
Name” from the menu and change the name before selecting
“Network Configuration”.
PHONES
AUDIO IN
ANTENNA
DC IN
18 V
5 V
2.1 A
LAN(10/100)
http://169.254.1.1
a
b