Pioneer SC-LX73 - Manual (Page 143)

Additional information 13
143
En
Scope of operation
Use of AS-BT100 is limited to home use. (Transmission
distances may be reduced depending on communication
environment).
In the following locations, poor condition or inability to
receive radio waves may cause the audio to be
interrupted or stopped:
• In reinforced concrete buildings or steelframed or
iron-framed buildings.
• Near large metallic furniture.
• In a crowd of people or near a building or obstacle.
• In a location exposed to the magnetic field, static
electricity or radio wave interference from radio
communication equipment using the same frequency
band (2.4 GHz) as AS-BT100, such as a
2.4 GHz wireless LAN device (IEEE802.11b/g) or
microwave oven.
• If you live in a heavily populated residential area
(apartment, townhouse, etc.) and if your neighbor’s
microwave is placed near your system, you may
experience radio wave interference. If this occurs,
move your unit to a different place. When the
microwave is not in use, there will be no radio wave
interference.
Radio wave reflections
The radio waves received by AS-BT100 include the radio
wave coming directly from the device equipped with
Bluetooth wireless technology (direct wave) and waves
coming from various directions due to reflections by
walls, furniture and building (reflected waves). The
reflected waves (due to obstacles and reflecting objects)
further produce a variety of reflected waves as well as
variation in reception condition depending on locations.
If the audio cannot be received properly due to this
phenomenon, try moving the location of the device
equipped with Bluetooth wireless technology a little. Also
note that audio may be interrupted due to the reflected
waves when a person crosses or approaches the space
between AS-BT100 and the device equipped with
Bluetooth wireless technology.
Precautions regarding connections to
products supported by AS-BT100
• Complete connections for all devices supported by
AS-BT100, including all audio cords and power
cables before connecting them to AS-BT100.
• After completing connections to AS-BT100, check
the audio and power cables to confirm that they not
twisted together.
• When disconnecting AS-BT100, confirm that you
have sufficient working space in the surrounding
area.
• When changing connections of audio or other cables
for products supported by this unit, confirm that you
have sufficient working space in the surrounding
area.
CAUTION
• Always connect AS-BT100 to the ADAPTER PORT of
the product supported by AS-BT100. If connections
are made to a connector other than the ADAPTER
PORT of the supported product, malfunctions or
damage may result to this unit or the supported
product.
• Please note that Pioneer is not responsible for
damages that result from connecting AS-BT100 to a
connector other than the ADAPTER PORT of a
supported product.