Pioneer SC-LX73 - Manual (Page 83)

Controlling the rest of your system (In case of SC-LX83) 10
83
En
Direct function
• Default setting: ON
You can use the direct function feature to control one
component using the remote control while at the same
time, using your receiver to playback a different
component. This could let you, for example, use the
remote control to set up and listen to a CD on the
receiver, and then use the remote control to rewind a
tape in your VCR while you continue to listen to your CD
player.
When direct function is on, any component you select
(using the input function buttons) will be selected by both
the receiver and the remote control. When you turn direct
function off, you can operate the remote control without
affecting the receiver.
1 While pressing MULTI OPERATION, press HOME
MENU.
The remote display shows
SETUP MENU.
2 Use
/ to select ‘DIRECT FUNC’, then press
ENTER.
The remote display prompts you for the button of the
input function you want to control.
3 Press the input function button for the component
you want to control, then press ENTER.
1
4 Use
/ to switch direct function ON or OFF, then
press ENTER.
The remote display shows
OK to confirm the setting.
Multi Operation and System Off
The Multi Operation feature allows you to program a
series of up to 6 commands for the components in your
system. For example, you could turn on your TV, turn on
your DVD player and start playing the loaded DVD using
only two buttons on the remote control.
Similar to multi operations, System Off allows you to use
one button to stop and switch off a series of components
in your system at the same time.
2
Programming a multi-operation or a
shutdown sequence
Set the remote control operation mode selector switch to
RECEIVER when you want to program this receiver’s
operations, to
SOURCE when you want to program
operations of other components.
1 While pressing MULTI OPERATION, press HOME
MENU.
The remote display shows
SETUP MENU.
2 Use
/ to select ‘MULTI OPERATE’ or ‘SYSTEM
OFF’ from the menu and press ENTER.
If you selected Multi Operation (
MULTI OPERATE), the
remote display prompts you for an input function button.
If you selected System Off ( SYSTEM OFF), go to step 4.
3 Press the input function button for the component
that will start the multi-operation, then press ENTER.
For example, if you want to start the sequence by
switching on your DVD player, press
DVD.
4 Use
/ to select ‘EDIT CODE’, then press ENTER.
To erase any previously stored multi-operations (or
shutdown sequences) select
CLEAR CODE above.
5 Use
/ to select a command in the sequence, then
press ENTER.
If this is the first command in the sequence, select
1ST
CODE. Otherwise, simply choose the next command in
the sequence.
PRESS KEY flashes after you press ENTER.
6 If necessary, press the input function button for the
component whose command you want to input.
This is only necessary if the command is for a new
component (input function).
7 Select the button for the command you want to
input.
The following remote control commands can be selected:
Note
1 You can’t use direct function TUNER, HMG NET RADIO, ADAPTER and iPod USB.
2 • Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other components (see
Setting the remote to control other components on page 80 for more on this).
• Some units may take some time to power up, in which case multiple operations may not be possible.
• Power on and off commands only work with components that have a standby mode.
• Up to 5 commands can be programmed for System Off.
DVD
RECEIVER SOURCE MAIN
MULTI
OPERATION
AUDIO
PARAMETER
VIDEO
PARAMETER
ZONE2
SOURCE
TV RECEIVER
3
iPod
USB OPTION
MULTI CH
ADAPTER
NET RADIO
INPUT SELECT LIGHT
CD
PHONO
AUX
INPUT MUTE MUTE
VOL
VOL
TV CONTROL
CH
VIDEO CD-R IN
TUNER
HMG
BD
TV
HDMI DVR
BDR
1 2
AUDIO
PARAMETER
TOP MENU
BAND
iPod CTRL PTY SEARCH
CATEGORY
LIST TOOLS
HOME
MENU
STATUS
THX PQLS MPX MEMORY
PHASE CTRL CH LEVEL
T.EDIT
GUIDE
VIDEO
PARAMETER
INPUT MUTE
TUNE
TUNE
PRESET PRESET
MUTE
PGM MENU
TV CONTROL
STEREO
SIGNAL SEL SLEEP AUDIO
INFO
DIMMER
A.ATT
CLR
SBch MCACC
HDMI OUT
D.ACCESS
ENTER
CLASS
DISP
CH
AUTO/ALC/
DIRECT STANDARD ADV SURR
ENTER
RETURN