Basic operation, Watching a dvd, Listening to a cd – Pioneer RCS-55 User Manual
Page 17: Listening to the radio, Before you start, English
Before you start
17
En
English
Basic operation
This manual is split into to parts, one covering using the
receiver subwoofer, the other using the DVD recorder.
Below are some common operations and where to find
them explained in this manual.
Watching a DVD
Remember that when using the remote to control the
DVD recorder, you should point the remote towards the
display unit, not the recorder itslelf.
1
Switch on the display unit (receiver subwoofer).
2
Switch on the DVD recorder.
3
Switch on your TV.
Turn on your TV and make sure that it is set to the correct
video input.
4
Press DVD.
5
Press
OPEN/CLOSE on the DVD recorder to
open the disc tray.
6
Load a disc.
Load a disc with the label side facing up, using the disc
tray guide to align the disc (if you’re loading a double-
sided DVD disc, load it with the side you want to play
face-down).
7
Press
(play) to start playback.
See
Basic playback
on page 52 for more on playing discs.
8
Adjust the volume.
9
Adjust the sound using the surround effects
See
Listening to your system
on page 22 for details.
Listening to a CD
1
Switch on the display unit (receiver subwoofer).
2
Switch on the DVD recorder.
3
Press DVD.
4
Load a CD and start playback
(page 53)
.
5
Adjust the volume.
6
Adjust the sound using the surround effects
(page 22)
.
Listening to the radio
1
Switch on the display unit (receiver subwoofer).
2
Tune to a station
(page 25)
.
3
Adjust the volume.
4
Adjust the sound using the surround effects
(page 22)
.
VOLUME
+
–
MUTE
RECORDER
RECEIVER
TOP MENU
RDS DISP
SYSTEM
SETUP
DISPLAY
TEST TONE
ST +
ST –
TUNE +
TUNE –
RETURN
DISC NAVIGATOR
DVD MENU
HOME
MENU
VIDEO INPUT
DVD
FM/AM
AUDIO INPUT
ENTER
REC
PREV
NEXT
STEP/SLOW
REC MODE
CHANNEL
ì
CM SKIP
CLEAR
Press to stop playback.
You can resume playback from the same
point by pressing
. (Press
again to
cancel the resume function.)
Pauses playback, or restarts playback
when paused.
Press to start scanning. Press repeatedly
to increase the scanning speed.
Introduction.book Page 17 Friday, July 8, 2005 2:28 PM