Pioneer RCS-55 - Manual (Page 48)

Getting started 04
48
En
Chapter 4
Getting started
Switching on and setting up
When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator. This takes you through setting the clock and
the internal TV tuner settings.
If you’re using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
1 Switch on your TV and set the video input to this
recorder.
2 Press the RECORDER button on the remote
control or the STANDBY/ON button on the front
panel to switch on.
• When you switch on for the first time, your TV should
display the Setup Navigator screen. (If the Setup
Navigator doesn’t appear, you can also access it from
the Initial Setup menu; see page 76).
• If this recorder is connected to a compatible TV using
a fully-wired 21-pin SCART cable, the recorder will
take a few seconds to download country, TV screen
size and language information. (Check the manual
that came with your TV for compatibility information.)
3 Use the / (cursor left/right) buttons to
choose a language, then press ENTER.
4 Press ENTER to start setting up using the Setup
Navigator.
• If you don’t want to use the Setup Navigator, press
(cursor down) to select Cancel, then press ENTER to
exit the Setup Navigator.
5 Select the Auto Channel Setup (‘Auto Scan’ or
‘Download from TV’), or ‘Do not set’, then press
ENTER.
• Select Do not set if you want to skip setting up the
channels (because they have already been set up, for
example).
• You can only use the Download from TV feature if
you connected this recorder to your TV using a
fully-wired 21-pin SCART cable connected to the
AV1•RGB-TV AV connector, and if your TV supports
this function (check your TV’s instruction manual for
more details).
VOLUME
+ –
MUTE
RECORDER RECEIVER
TOP MENU
RDS DISP SYSTEM
SETUP
DISPLAY TEST TONE
ST + ST –
TUNE +
TUNE –
RETURN
DISC NAVIGATOR DVD MENU
HOME
MENU
VIDEO INPUT
DVD FM/AM AUDIO INPUT
ENTER
CLEAR
REC
PREV NEXT STEP/SLOW
REC MODE
CHANNEL
ì
CM SKIP CM
OSD Language
OSD Language
English
Complete this setup before you start using your recorder.
Please use the Initial Setup if you want to make more
detailed settings.
Start
Cancel
Setup Navigator
Tuner
Download from TV
Do not set
Auto Scan
DVR-230_UK.book Page 48 Thursday, July 7, 2005 3:24 PM