Pioneer DEH-P9400MP - Manual (Page 43)

E
xtra functions
These functions are helpful in adjusting the
sound to suit your system or your personal pref-
erences.
• Using octaver and BBE sound (EFFECT)
• Using loudness (LOUD)
• Using sound field control, octaver and BBE
sound (SFC)
• Using automatic sound levelizer (ASL)
• Adjusting source levels (SLA)
• Switching the digital attenuator (D.ATT)
A
udio menu
The audio menu has the following functions:
Note:
• If you do not operate the function within about 30
seconds, the display is automatically returned.
(When you select the 13-band graphic equalizer
mode (EQ2), the time alignment adjustment mode
(T.AL, T.AL2) or the network adjustment mode
(NW), the display is not returned automatically.)
• “T.AL” or “T.AL2” is displayed only when you select
“FL” or “FR” in the position selector mode (POSI).
• “SW2” is displayed only when the subwoofer output
is on in the subwoofer output mode (SW1).
• “SLA” is not displayed when you select FM tuner as
the source.
• “A.EQ” is displayed after the auto-equalizer curve
has been set.
U
sing position selector
One way to assure a more natural sound is to
clearly position the stereo image, putting you
right in the center of the sound field.
The position selector function lets you automati-
cally adjust the speakers’ output levels and
inserts a delay time to match the number and
position of occupied seats.
• You cannot select “ALL” when “NW” mode
has been selected.
1. Press AUDIO and then press NEXT to dis-
play “POSI”.
Press NEXT until “POSI” appears.
2. Press POSI to select the position selector
mode.
3. Press the corresponding button to select
a listening position.
Button Position
FL Front seat left
FR Front seat right
FRONT Front seats
ALL All seats
• Press the same button again to cancel the
selected listening position.
Note:
• You can also use
5, ∞, 2 or 3 to select the listen-
ing position.
Button Position
2
Front seat left
3
Front seat right
5
Front seats
∞
All seats
42
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS