Before using this product, Class 1 laser product, Recaution – Pioneer DEH-P9400MP User Manual

Page 6: N case of trouble, Bout wma, Witching the dsp setting mode

Advertising
background image

5

Before Using This Product

P

recaution

• A “CLASS 1 LASER PRODUCT” label is

affixed to the bottom of the player.

• The Pioneer CarStereo-Pass is for use only in

Germany.

• Keep this manual handy as a reference for

operating procedures and precautions.

• Always keep the volume low enough for out-

side sounds to be audible.

• Protect the product from moisture.
• If the battery is disconnected, the preset

memory will be erased and must be repro-
grammed.

I

n case of trouble

Should this product fail to operate properly,
contact your dealer or nearest authorized
Pioneer Service Station.

A

bout WMA

The Windows Media™ logo printed on the box
indicates that this product can playback the
WMA data.
WMA is short for Windows Media Audio and
refers to an audio compression technology that
is developed by Microsoft Corporation. WMA
data can be encoded by using Windows Media
Player version 7, 7.1 or Windows Media Player
for Windows XP.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered trademarks
of Microsoft Corporation in the United States
and/or other countries.

Note:
• Depending on the application which has performed

the encoding of the WMA files, the operation may
not be normal.

• Depending on the application which has performed

the encoding of the WMA files, the display of the
album name and other character information may
not be normal.

S

witching the DSP setting mode

This product features two operation modes: the
3-way network mode (NW) and the standard
mode (STD). You can switch between modes
as desired. Initially, the DSP setting is set to the
standard mode (STD).
• After switching, reset the microprocessor.

• Use a thin standard tip screwdriver to

switch the DSP switch on the side of this
product.

CLASS 1
LASER PRODUCT

Advertising