Pioneer FH-P4100R - Manual (Page 38)

Black plate (38,1)
38 CRD3576-A
Introduction of audio
adjustments
2
1
4 5 3 6
1 Audio display
Shows the audio adjustments status.
2 LOUD indicator
Appears in the display when loudness is
turned on.
3 AUDIO button
Press to select an audio function.
4 BAND button
Press to return to the display of each
source.
5 c/d buttons
Press to adjust the selected audio function.
6 a/b buttons
Press to adjust the selected audio function
and turn it on/off.
% Press AUDIO to display the audio
function names.
Press AUDIO repeatedly to switch between
the following audio functions:
FADER (balance adjustment)LOUD (loud-
ness)SLA (source level adjustment)
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FADER.
Press AUDIO until FADER appears in the dis-
play.
# If the balance setting has been previously ad-
justed, BAL will be displayed.
2 Press a or b to adjust front/rear
speaker balance.
Each press of a or b moves the front/rear
speaker balance towards the front or the rear.
FADER :F25  FADER :R25 is displayed as the
front/rear speaker balance moves from front to
rear.
# FADER : 0 is the proper setting when only
two speakers are used.
# When the rear output setting is subwoofer,
you cannot adjust front/rear speaker balance. Re-
fer to Switching the rear output setting on page
46.
Audio Adjustments 09
En
38
Section