The initial setup menu – Pioneer DVR-550H-K User Manual
Page 121
The Initial Setup menu
121
En
15
Seamless Playback
On
Playback is smooth, but with a trade-off against the
accuracy of the edit points.
Off •
You may notice momentary interruption at edited
points during playback of a VR mode Play List.
This setting applies to HDD, DVD-R/-RW (VR) and DVD-RAM playback.
Parental Lock
Set Password
In order to change the parental lock level or change
the country/area code, set the password using this
option. From the following screen, enter a four-digit
number that will be your password.
Change Password
In order to change the password, first enter your
existing password and then a new one from the
following screen.
Change Level
From the following screen, first enter your password
and then set a parental lock level.
Country/Area
Code
From the following screen, first enter your password
and then set a country/area code. See
Country/Area
code list
on page 136.
Only certain discs have parental lock and country/area code features. Check the disc packaging to see what features
the disc has. If you forget your password you can reset it by resetting the recorder to its factory settings. See
Resetting the recorder on page 139.
Angle Indicator
On •
A camera icon appears on-screen during multi-angle
scenes on a DVD-Video disc.
Off
Nothing is indicated on-screen when a multi-angle
scene is showing.
HDMI Output
(only available when an HDMI device is connected)
Screen Resolution
1920 x 1080p
Constant 1920 x 1080p output.
1920 x 1080i
Constant 1920 x 1080i output.
1280 x 720p
Constant 1280 x 720p output.
720 x 576p
(720 x 480p)
Constant 720 x 576p output (when setting the
Input
Line System
to
525 System
, video is output in 720 x
480p).
720 x 576i
(720 x 480i)
Constant 720 x 576i output (when setting the
Input
Line System
to
525 System
, video is output in 720 x
480i).
• If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case,
press
OPEN/CLOSE
while holding down the
(Stop) button on the front panel to switch the setting (this also
switches Component Video Out
on page 115
to the default setting).
• If you have the
Colour
set to
YCbCr 4:2:2
, you cannot select
720 x 576i
(720 x 480i)
.
Setting
Options
Explanation
DVR550HK_YXVSN5_EN.book 121 ページ ２００７年４月５日 木曜日 午後６時５１分