Copying and backup 10 – Pioneer DVR-550H-K User Manual
Page 94
Copying and backup
10
94
En
– the recorder is reset to its factory
settings (see
Resetting the recorder
on
page 139).
• It may not be possible to copy from a
DVD disc that was recorded on a
different DVD recorder or a PC.
1
Select ‘Copy’ from the Home
Menu.
2
Select ‘DVD/CD
HDD’.
3
Select a Copy List type.
• Selecting
Create New Copy List
will
erase any Copy List already stored in the
recorder.
4
Add titles to the Copy List
(highlight a title and press ENTER to add).
Titles you’ve added to the Copy List are
highlighted in pink.
5
Select ‘Next’ from the
command menu panel to proceed to the
title edit screen.
6
Select a title to edit.
A menu appears of Copy List editing
commands:
•
Erase
– Erase individual titles from the
Copy List (see
Erase
on page 80).
•
Move
– Change the order of titles in the
Copy List (see
Move
on page 86).
•
Preview
– Check the content of a title in
the Copy List.
•
Cancel
– Exit the menu.
Repeat this step for as many titles you have
that need editing.
7
Select ‘Next’ from the
command menu panel to proceed to the
copy options screen.
• Select
Recording Mode
if you want to
change the recording quality (see
Recording Mode
below).
8
Select ‘Start Copy’ to start
copying.
Recording Mode
1
Select ‘Recording Mode’ from
the command menu panel.
2
Select a recording mode for
the copy.
•
High-Speed Copy
1
– The Copy List is
copied at the same recording quality as
the original.
•
XP
,
SP
,
LP
,
EP
,
SLP
,
SEP
,
MN
2
– The Copy
List is copied at the specified recording
quality in real-time. (Note that if you copy
at a higher quality setting than the
original, the copy will not be better
quality than the original.)
If you select
MN
above, you can also
change the level setting (
MN1
to
MN32
3
,
LPCM
or
XP+
4
) from the
Recording Quality box that appears.
HOME MENU
ENTER
ENTER
ENTER
ENTER
ENTER
Note
1 When copying to a DVD-R/-RW (Video mode) or DVD+R/+RW, the chapter markers in the copy may not be in
exactly the same position as the original.
2 When the copy mode is set to something other than High-Speed Copy for copying to a DVD-R/-RW (Video mode)
or DVD+R/+RW, the chapter markers of the original are not copied. Chapter markers are put into the copy at
regular intervals, according to the Auto Chapter setting (see also
Auto Chapter (Video)
and Auto Chapter
(DVD+R/+RW) on page 120).
3 When copying to a DVD+R/+RW,
MN1 to MN3 and SEP modes are not available.
4
XP+ mode available only when copying to HDD.
ENTER
ENTER
ENTER
ENTER
DVR550HK_YXVSN5_EN.book 94 ページ ２００７年４月５日 木曜日 午後６時５１分