Connecting an external decoder box (1), Connections, Connecting an external – Pioneer DVR-550H-K User Manual

Page 19: Decoder box (1), Coaxial hdmi out, Output input 3

Advertising
background image

Connections

19

En

02

Position the IR transmitter end of the G-
LINK™ cable so that the IR receiver on your
cable/satellite/digital terrestrial receiver will
pick up the control signals (see diagram).

See the manual that came with your cable/
satellite/digital terrestrial receiver if you’re
not sure where the IR receiver is on the front
panel. Alternatively, experiment with the
remote control, operating it from very close
range until you find the place where the
receiver responds.

Tip

• This recorder has a ‘through’ function

which allows you to record a TV
programme from the built-in TV tuner in
this recorder while watching a video
playing on your VCR (To use this feature
when the recorder is in standby,

Power

Save

must be set to

Off

— see

Power

Save

on page 113).

Connecting an external

decoder box (1)

If you have an external, dedicated decoder
box for your satellite or cable TV system, use
the setup described on this page. See above
for how to connect the G-LINK™ cable.

Important

• Do not connect your decoder box directly

to this recorder.

• Information from the decoder (for

example, relating to pay TV services), is
only viewable when this recorder is off
(in standby).

• For timer recording to work properly on

this recorder, the VCR/satellite receiver/
cable box must also be switched on
during recording.

• It is not possible to watch one TV

programme and record another using
this setup.

1

Connect the cable from the antenna/

cable TV outlet to the antenna input on
your VCR/satellite receiver/cable box.
2

Use a SCART cable (not supplied) to

connect your decoder to your VCR/
satellite receiver/cable box.

See the manual for your decoder box for
more detailed instructions.

3

Use a SCART cable to connect your

VCR/satellite receiver/cable box to the
AV2 (INPUT 1/DECODER) AV connector
on this recorder.
4

Use a SCART cable to connect the AV1

(RGB)-TV AV connector to your TV.

CONTROL

G-LINK

IN

AV 1 (RGB) – TV

AV 2 (INPUT 1/DECODER)

S-VIDEO

O

OUTPUT

INPUT 3

G-LINK cable

AC IN

DIGITAL

AUDIO OUT

COAXIAL

HDMI OUT

CONTROL

G-LINK

IN

AV 1 (RGB) – TV

AV 2 (INPUT 1/DECODER)

S-VIDEO

VIDEO

AUDIO

L

R

OUTPUT

INPUT 3

COMPONENT VIDEO OUT

Y

P

B

P

R

ANTENNA

IN

OUT

TV

Antenna/cable TV
wall outlet

VCR/Satellite receiver
/Cable box

Decoder

1

2

3

4

From SCART AV

connector

To SCART AV

connector

SCART AV

connection

AV2 (INPUT 1/

DECODER)

AV1 (RGB) - TV

To antenna input

DVR550HK_YXVSN5_EN.book 19 ページ 2007年4月5日 木曜日 午後6時51分

Advertising