Pioneer AVIC-X1 - Manual (Page 108)

106
Appendix
NAVI/AV
Problems in the Audio screen (common)
Problems in the Audio screen (during DVD video playback)
When the screen is frozen...
Park your vehicle at a safe place, and cut the engine off. Turn the ignition key back to “Acc off”. Then
start the engine again, and turn the power to the navigation unit back on. If this does not solve the
problem, press the RESET button on the navigation unit.
Symptom Cause Action (See)
Playback is not possible. The disc is dirty. Clean disc. (
➞
“Hardware Manual”)
The loaded disc is a type this unit
cannot play. Check what type the disc is.
Non compatible video system disc is
loaded. Change to a disc compatible to your
video system.
There’s no picture. The handbrake cord is not con-
nected. Connect a handbrake cord, and
apply the handbrake.
The handbrake is not applied. Connect a handbrake cord, and
apply the handbrake.
There’s audio and video skipping. This unit is not firmly secured. Secure this unit firmly.
Rear display picture disappears. • The source disc being listened to
with the product has been ejected.
• The REAR button was pressed and
REAR ON mode switched off.
• There was a problem with the rear
display or a faulty wiring connec-
tion, for example.
• Rear View is selected on the
screen.
• When the gearstick is in [R], dis-
plays rear view camera images.
(When “NAVI” is selected in
REAR DISP menu.)
• Before ejecting the disc, switch the
source. This problem may occur
when certain connection methods
are used.
• Press the REAR button to turn
REAR ON mode on.
• Check the rear display and its con-
nection.
• Select view mode other than Rear
View.
• Move the gearstick other than turn
[R] position. (Select SOURCE in
REAR DISP menu.)
Nothing is displayed and the touch
panel keys cannot use. The setting for the rear view camera
is incorrect.
The gearstick was placed in [R] when
the rear view camera was not con-
nected. Connect a rear view camera cor-
rectly.
Press NAVI/AV button to return to
the source display and then select
the correct setting for CAMERA.
➲ About CAMERA setting
➞
Page 90
Symptom Cause Action (See)
No sounds are heard.
The volume level will not rise. Cables are not connected correctly. Connect the cables correctly.
The unit is performing still, slow
motion or frame-by-frame playback. There is no sound during still, slow
motion or frame-by-frame playback.
“dts” is selected for the DVD video
disc sound track. Switch to a non “dts” sound track.
The icon is displayed, and
operation is not possible.
The operation is prohibited for the
disc. This operation is not possible.
The operation is not compatible with
the disc’s configuration. This operation is not possible.
The picture stops (pauses) and the
unit cannot be operated. Reading of data has become impos-
sible during playback. After touching once, start play-
back once more.
The picture is stretched, the aspect is
incorrect. The aspect setting is incorrect for the
display. Select the appropriate setting for
your display. (
➞
“Hardware Manual”)
Playback is not possible. The loaded disc has a different
region number from this unit. Replace the disc with one featuring
the same region number as this unit.
(
➞
“Hardware Manual”)
CRB1903B_ENGLISH.book Page 106 Friday, April 30, 2004 9:27 PM