Pioneer AVIC-X1 - Manual (Page 90)

88
Chapter 8
Customising the Audio Source Setting
AV
4
Touch any of 1 — 8 to select the desired
level.
The parental lock level is set.
• LEVEL 8 — Playback of the entire disc is
possible (initial setting)
• LEVEL 7 — LEVEL 2 — Playback of discs
for children and non-adult oriented discs is
possible
• LEVEL 1 — Playback of discs for children
only is possible
❒ If you want to change the parental level,
enter the registered code number in the
Step 2.
❒ We recommend to keep a record of your
code number in case you forget it.
❒ The parental lock level is recorded on the
disc. You can confirm it by looking at the
disc package, included literature or on the
disc itself. With discs that do not feature a
recorded parental lock level, you cannot
use parental lock.
❒ With some discs, parental lock operates to
skip certain scenes only, after which nor-
mal playback resumes. For details, refer to
the disc’s instructions.
❒ If you forget the registered code number,
touch “CLEAR” 10 times on the screen in
the Step 2. The registered code number is
cancelled, letting you register a new one.
Initial Settings
Adjusting initial settings
Initial settings lets you perform initial set up of
different settings for navigation unit.
(1) Function display
Shows the function names.
1
Touch the source icon and then touch
“SOURCE OFF” to turn source off.
When the source icon is not displayed, you
can display it by touching the screen.
2
Touch “A.MENU” and then touch
“INITIAL” to display the function names.
The function names are displayed and opera-
ble ones are selected.
When “A.MENU” is not displayed, you can
display it by touching the screen.
To return to the previous display, touch
“BACK”.
To return to the display of each source, touch
“ESC”.
Setting the FM tuning step
Normally the FM tuning step employed by seek
tuning is 50 kHz. When AF or TA is on, the tuning
step automatically changes to 100 kHz. It may be
preferable to set the tuning step to 50 kHz when
AF is on.
1
Touch “FM STEP” in the INITIAL menu.
Each time you touch “FM STEP” will switch
the FM tuning step between 50 kHz and 100
kHz while AF or TA is on.
❒ The tuning step remains at 50 kHz during
manual tuning.
(1)
Initial Settings
CRB1903B_ENGLISH.book Page 88 Friday, April 30, 2004 9:27 PM