Pioneer AVIC-X1 - Manual (Page 58)

56
Chapter 5
Customising Your Navigation System
NAVI
❒ In order to operate the navigation unit by
voice, you need the microphone kit (CD-VC1),
which is sold separately. Before connecting
the microphone, be sure to first turn the igni-
tion switch OFF (ACC OFF). When the micro-
phone is connected, turn the ignition switch
ON (ACC ON).
On :
The automatic voice recognition is engaged each
time your vehicle is started.
Off* :
Voice operation starts after touching VOICE
icon.
Voice Recog.Help
This setting controls the list of available voice
commands displayed during voice operation.
You should set “Voice Recog.Help” only when
the microphone of the voice recognition system
(sold separately) is connected.
On* :
The list of commands is shown.
Off :
The list of commands is not shown.
CRB1903B_ENGLISH.book Page 56 Friday, April 30, 2004 9:27 PM