Belkin P74393UK - Manual (Page 15)

13 12
Setup for Advanced Users
13 12
Setup for Advanced Users
(The first three octets of the IP addresses are the same).
7. Type the Print Server’s IP address into your Internet browser from
any computer. For example, if your IP address is 192.168.2.225,
type “192.168.2.225” (do not type in anything else such as
“http://” or “www”). Then press the “Enter” key.
8. Clicking the “Login” button or clicking on any one of the links on
the home page will take you to the login screen. The Print Server
ships with no password entered. In the login screen, leave the
password blank and click “Submit” to log in.
9.
Set the IP address for the Print Server by clicking “IP Address”
(see “Web Interface – IP Address” for more info).
10.
Cycle power on the Print Server to reboot it to the new
configurations.