Belkin P74393UK - Manual (Page 16)

13 13
se
ct
io
n
2
1
3
4
5
6
7
9
10
8
Configure Computers to Print to the Print Server
1.
Install Port Monitor software on each computer by running
“instport.exe” from the CD.
2.
Configure the Belkin Port Monitor on each computer printer driver
to point to the correct Print Server as follows:
a)
In Windows, select the printer’s properties for the printer
connected to the Print Server and select the “Port” tab,
select the Belkin port, and click “Configure Port...”.
b)
On the “Belkin Port: Properties” window, click “Locate Servers”.
c)
On the “Available Servers” window, select the Print Server
you want to print to.
Setup for Advanced Users