Briggs & Stratton 8 - Manual (Page 12)

12
Prepare for Operation
It is essential that the Figure-8 Eliminator Trailer be properly set up before operation.
Using the following procedure will allow the unit to be set up in a short period of time
and yield optimum performance.
A. The trailer may be disconnected from the tow vehicle or left connected,
depending on your specific job site conditions.
B. Use wheel chocks (not included) to prevent trailer movement.
C. Disconnect Arm Lock. Unscrew the locking mechanism (Figure 1). Fold back
(Figure 2) and secure with safety pin (Figure 3).
Figure 2. Fold Back Arm
5.
Figure 1. Disconnect Arm Lock
Figure 3. Secure With Safety Pin